bringsmart SRR2418 8000rpm DC 12V 24 Volt brushless motor

SRR2418

Quantity

Contact Now

add to cart

Product data

Basic information

Sort by power source type	DC
Diameter of gearbox (mm）	18*24.5
Diameter of gearbox (inch）	0.71*0.96
Max. length（mm）	33.5
Max. length（inch）	1.32
Companies producing the product	Fuzhou Bringsmart Intelligent Tech. Co., Ltd

Input

Operating voltage (v)	24v
Operating current	A

Output

No load speed	8700rpm
Load speed	rpm
Load torque	kg.com
Load power	2.28w
Stall torque	kg.com

R2418 24V 8000rpm Micro DC High Speed Brushless Motor

PIN:

1.PWM speed (input 1-50KHZ PWM signal, motor speed can be adjusted by adjusting duty ratio)

2. Power negative

3. Reversible (when the float is CCW, short to ground is CW)

4. Feedback (N = 60 * F / P), F is the feedback output frequency, P is the number of pole pairs: 6 pairs

5. Power positive

Wire connection method:

1, when red wire connecting the power positive, the black and blue wire connected to the power negative, the motor rotation direction is forward: CCW

2. When the red line connecting the power of positive, black, blue and yellow wire connected to the power negative, the motor rotation direction is reversed: CW

3, when the blue wire connected to the power negative, the motor running at the limit, the blue line separately connect with PWM, motor speed can be adjusted.

4. The method of wiring connections must comply with the above description, the motor unacceptable violation of the above operation, do not connect the motor voltage 26VDC above.

5, when connecting terminals with sockets, terminals are correctly aligned, not forced into, when the terminal pulled out from the socket, do not pull the wires, or leading to the damage of socket in the motor.

BRINGSMART MOTOR DESIGN

If you are interested in this motor, then you can also find out more about what we can do for your project, which can reduce your project costs and development time.

Multiple parameters

We can do many kinds of gearmotor voltage, current, speed, load, just tell us the parameters you need.

Shaft modifications

If your project has a customized need for the gear motors shaft material (carbon steel, alloy steel, stainless steel, etc.), shaft length (long shaft, short shaft, single shaft, double shaft), shaft shape (d-cuts, keyway cuts, location holes, threaded shafts, and shaped shafts), please give us your drawings, and we use the most advanced shaft machining equipments to meet your needs.

Wires and connectors

We can assemble the length and parameters of wires and connectors of dc brush and brushless motors according to your requirements.

Customised wiresets including all manner of connectors from JST, Hirose, AMP, Molex, AVX, and Kyocera

We also offer the following motor accessories, each of which has been rigorously selected and tested to ensure a perfect match for our motors, ensuring the stability of your application.