bringsmart SRJGB37-520B 9-1200rpm 0.1-30Kg.cm DC 12 Volt encoder motor
Red: Motor Power + (Swapping with white reverses rotation)
Black: Encoder Power -
Yellow: Signal Line—11 pulses per motor revolution
Green: Signal Line—Resolution = 11 × reduction ratio
Blue: Encoder Power +
White: Motor Power - (Swapping with red reverses rotation)
Output Signal: Square wave (default)/
Sine wave (custom) A and B phases
Power Supply Voltage Range: 3.3V–5V
Operating Temperature Range: -40°C to 120°C
Product data
Basic information
| Sort by power source type | DC |
| Diameter of gearbox (mm） | L*33 |
| Diameter of gearbox (inch） | L*1.30 |
| Max. length（mm） | 48+L |
| Max. length（inch） | 1.89+L |
| Companies producing the product | Fuzhou Bringsmart Intelligent Tech. Co., Ltd |
Input
| Operating voltage (v) | 12v |
| Operating current | 0.12-1A |
Output
| No load speed | 12-1600rpm |
| Load speed | 9-1200rpm |
| Load torque | 0.1-30kg.com |
| Load power | 3w |
| Stall torque | 0.5-40kg.com |
JGB37-520B 12 Volt Geared Motor 12-1600rpm With Encoder Disk
Encoder connection method
1) Red wire : power +
2) Black wire : encoder -
3) Yellow wire : signal line one
4) Green wire : encoder +
5) Blue wire : motor -
6) White wire : signal line two
7) Positive rotation of the motor connection method: red wire and green wire connected to the power supply positive, black wire and blue wire connected to the power supply negative, yellow wire and white wire are signal wire.
8) Motor reverse rotation connection method: red wire and green wire connected to the power supply negative, black wire and blue wire connected to the power supply positive, yellow wire and white wire are signal wire
9) Only connected to the black wire, green wire, encoder lights up
10) The red wire is connected to the power supply positive, the black wire is connected to the power supply negative, the motor is rotating in the forward direction
BRINGSMART MOTOR DESIGN
If you are interested in this motor, then you can also find out more about what we can do for your project, which can reduce your project costs and development time.
Multiple parameters
We can do many kinds of gearmotor voltage, current, speed, load, just tell us the parameters you need.
Shaft modifications
If your project has a customized need for the gear motors shaft material (carbon steel, alloy steel, stainless steel, etc.), shaft length (long shaft, short shaft, single shaft, double shaft), shaft shape (d-cuts, keyway cuts, location holes, threaded shafts, and shaped shafts), please give us your drawings, and we use the most advanced shaft machining equipments to meet your needs.
Wires and connectors
We can assemble the length and parameters of wires and connectors of dc brush and brushless motors according to your requirements.
Customised wiresets including all manner of connectors from JST, Hirose, AMP, Molex, AVX, and Kyocera
We also offer the following motor accessories, each of which has been rigorously selected and tested to ensure a perfect match for our motors, ensuring the stability of your application.