bringsmart SRJGB37-3650 4-970rpm 1.2-3.5Kg.cm DC 12V 24 Volt brushless gear motor
3650 5-wire control wiring
Red wire: motor power + can not be connected to the wrong
Black wire: motor power supply - can not be connected to the wrong
Yellow wire: signal motor 6 pulses per turn signal
Blue wire: 0-5V voltage speed control
White wire: positive and reverse line (connected with the black together with the negative level of reversal)
Default overcurrent protection 4A, blocking protection, with automatic start function.
PWM speed control wiring points] must use 0-5V
1-[Blue line] access to the PWM pulse width speed controller in the middle of the foot
2- [black wire] and motor power supply common ground - (must be shared not separate)
3- [PWM +] need to be connected to another power supply being pole (separate from the motor + pole)
Note: power supply positive and negative poles connected to the wrong power supply positive and negative poles touching the FG line speed line, will burn the driver board, resulting in motor stall dead!
Product data
Basic information
| Sort by power source type | DC |
| Diameter of gearbox (mm） | L*36 |
| Diameter of gearbox (inch） | L*1.42 |
| Max. length（mm） | 72+L |
| Max. length（inch） | 2.84+L |
| Companies producing the product | Fuzhou Bringsmart Intelligent Tech. Co., Ltd |
Input
| Operating voltage (v) | 12v24v |
| Operating current | 0.15-0.6A |
Output
| No load speed | 5-1270rpm |
| Load speed | 4-970rpm |
| Load torque | 1.2-35kg.com |
| Load power | w |
| Stall torque | 2.4-35kg.com |
BRINGSMART MOTOR DESIGN
If you are interested in this motor, then you can also find out more about what we can do for your project, which can reduce your project costs and development time.
Multiple parameters
We can do many kinds of gearmotor voltage, current, speed, load, just tell us the parameters you need.
Shaft modifications
If your project has a customized need for the gear motors shaft material (carbon steel, alloy steel, stainless steel, etc.), shaft length (long shaft, short shaft, single shaft, double shaft), shaft shape (d-cuts, keyway cuts, location holes, threaded shafts, and shaped shafts), please give us your drawings, and we use the most advanced shaft machining equipments to meet your needs.
Wires and connectors
We can assemble the length and parameters of wires and connectors of dc brush and brushless motors according to your requirements.
Customised wiresets including all manner of connectors from JST, Hirose, AMP, Molex, AVX, and Kyocera
We also offer the following motor accessories, each of which has been rigorously selected and tested to ensure a perfect match for our motors, ensuring the stability of your application.