R2418 24V 8000rpm Micro DC High Speed Brushless Motor
PIN:
1.PWM speed (input 1-50KHZ PWM signal, motor speed can be adjusted by adjusting duty ratio)
2. Power negative
3. Reversible (when the float is CCW, short to ground is CW)
4. Feedback (N = 60 * F / P), F is the feedback output frequency, P is the number of pole pairs: 6 pairs
5. Power positive
Wire connection method:
1, when red wire connecting the power positive, the black and blue wire connected to the power negative, the motor rotation direction is forward: CCW
2. When the red line connecting the power of positive, black, blue and yellow wire connected to the power negative, the motor rotation direction is reversed: CW
3, when the blue wire connected to the power negative, the motor running at the limit, the blue line separately connect with PWM, motor speed can be adjusted.
4. The method of wiring connections must comply with the above description, the motor unacceptable violation of the above operation, do not connect the motor voltage 26VDC above.
5, when connecting terminals with sockets, terminals are correctly aligned, not forced into, when the terminal pulled out from the socket, do not pull the wires, or leading to the damage of socket in the motor.
